AutoBorne Sealers

AutoBorne Sealers are the starting foundation for any graphic, complete automotive or large-panel paint job. AutoBorne Sealers have incredible adhesion to any substrate including plastic. They dry quickly and level and may be dry sanded with 1000 grit or finer sandpaper. Subsequent coats of Auto Air Colors will also dry quicker when applied over AutoBorne Sealers.
They are universally compatible with any paint system and can be appliec direct to other primer types such as DTM etch-primers used to treat bare metal before AutoBorne Sealer is applied.
AutoBorne sealers may be applied directly to aluminium, wood, urethane and most plastics, their adhesion is truly tenacious.

AutoBorne Sealers are a water-based epoxy which takes 48 hours to fully cure after application. They may be taped on, sanded and all of our other paints products may be applied less than 30 minutes after application. (They may be top-coated with solvent-based paint soon after application provided the Sealers are wiped with degreaser or sanded first).
Reduce 10% per volume with 4012 High Performance Reducer through a 1.2-1.4mm tip-sized spraygun at approximate 25-30% psi. Do not reduce with 4020 Automotive Reducer.